Sealing: It adopts battery slot cover and pole double seal design to prevent acid leakage. The reliable safety valve can prevent outside air and dust from entering the battery inside
motorcycle battery manufacturers
WHAT CAUSES A BATTERY TO FAIL PREMATURELY
Antimony Batteries (Conventional 6-Volt and 12-Volt Standard)
Even when the motorcycle is not being used, these batteries discharge (SELF DISCHARGE) at the rate of approximately 0.5 to 1% per week period. The rate of discharge increases with warm temperatures. See the approximate rates of discharge shown in Figure 1 to the right.
Lead Calcium Batteries (12-Volt Premium High Performance)
The lead/calcium technology motorcycle batteries have a longer life because they hold their charge more than three times as long as the conventional lead antimony batteries. These batteries discharge (SELF DISCHARGE) at a weekly rate of approximately .15 - .3%. See Figure 2 to the right. Some lead/calcium batteries also contain a special chemical that resists sulfation formation on the battery plates.
In order to minimize the self discharge of the battery, it is recommended that the battery be placed in a cool (NOT FREEZING) dry location when the motorcycle is not being used.
Some big motorcycles (1,000 cc & up) have electric accessories such as clocks, GPS, radios, computer memory and alarm discharge the battery even when the ignition is turned off. The amperage drain of each motorcycle is different depending on the model, year and electric accessories.
The chart below shows how quickly the battery is discharged by BOTH self discharge and current drain.
Note: If the battery is less that 100% charged when the battery begins standing, the discharge period will be shorter than the time indicated above .
HOW TO DETERMINE BATTERY STATE-OF-CHARGE
To check the battery's state-of-charge you can use one of three methods: 1.) syringe hydrometer 2.) voltmeter or 3.) 5-Ball Hydrometer. See the table below for a comparison between 3 methods to determine the accurate state-of-charge.